FixVault
Home › Hyundai › 2021 › Tucson Value, 4WD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.0L › Camshaft Position Sensor (CMPS) › Repair Procedures › Removal › Bank 1/Exhaust

Bank 1/Exhaust

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor.
    G13020951Courtesy of HYUNDAI MOTOR AMERICA
About FixVault