FixVault
Home › Hyundai › 2021 › Veloster 2.0, Automatic Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.0L › Variable Charge Motion Actuator (VCMA) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the VCMA connector (A).
    G13055591Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the VCMA (A) after removing 3 installation bolts.
G13055592Courtesy of HYUNDAI MOTOR AMERICA
About FixVault