FixVault
Home › Hyundai › 2021 › Veloster 2.0, Automatic Trans › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle Control System - 2.0L › Output Speed Sensor › Repair Procedures › Inspection

Repair Procedures: Inspection

  1. Using the GDS, check the input/output speed sensor waveforms.
    • Turn OFF the ignition switch.
    • Connect the GDS to the Data Link Connector (DLC) on the lower crash pad.
    • Ignition "ON" & Engine "ON".
    • Check the input/output speed sensor waveforms at high speed and low speed.
    G13055944Courtesy of HYUNDAI MOTOR AMERICA
    G13055945Courtesy of HYUNDAI MOTOR AMERICA
About FixVault