Repair Procedures: Installation
CAUTION:
- If the oil seal on the transaxle case side is damaged and fluid is leaking, replace the oil seal with a new unit. When installing the new oil seal, use the specialized tool (oil seal installer, 09453-2F300).
- To install, reverse of the replacement procedures.
- Add the manual transaxle fluid after Installing the manual transaxle.
(Refer to Manual Transaxle System - "MANUAL TRANSAXLE FLUID ")
- Perform bleeding air procedure in concentric slave cylinder after pouring the brake fluid.
(Refer to Clutch System - "CONCENTRIC SLAVE CYLINDER ")