FixVault
Home › Hyundai › 2021 › Veloster Turbo › Repair and Diagnosis › External Pages › Different variant/trim › Section 13 (Clutch System) › Clutch Regulator › Repair Procedures › Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. To install, reverse the removal procedures.
  2. Perform bleeding air procedure in concentric slave cylinder after pouring the brake fluid.Gasoline 1.6 

    (Refer to Clutch System - "CONCENTRIC SLAVE CYLINDER ")

  3. Perform bleeding air procedure in clutch release cylinder after pouring the brake fluid.Gasoline 2.0 

    (Refer to Clutch System - "CLUTCH RELEASE CYLINDER ")

About FixVault