DTC Information And Inspection: DTC Detecting Condition

Troubleshooting		Condition	Possible Cause
Main Action		Electrical inspection	Poor contact of connector Open or short in O2 Sensor (Down) circuit O2 Sensor (Down)
Prerequisite Condition		Battery voltage is at between 10.7 and 16V No fuel cut-off
Threshold Value	Case1	Sensor voltage is higher than 0.4V and lower than 0.5V
Threshold Value	Case2	Absolute voltage difference between High and Low Pins when is less than 0.006V High Pin voltage is less than 1.7V Low Pin voltage is greater than 0.65V
Diagnostic Time		Continuously
MIL		2nd Driving Cycle