FixVault
Home › Hyundai › 2022 › Kona Limited, FWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.6L › Engine Control Module (ECM) › Repair procedures › Adjustment › ECM neutralization procedure (With immobilizer)

ECM neutralization procedure (With immobilizer)

CAUTION:
  • When replacing the ECM, the vehicle equipped with the immobilizer must be performed procedure as below.

    [In the case of installing used ECM] 

    1. Perform "ECM Neutral mode" procedure with diagnostic tool. (Refer to Body Electrical System - "IMMOBILIZER SYSTEM ")
    2. After finishing "ECM Neutral mode", Perform "Key teaching" procedure with diagnostic tool. (Refer to Body Electrical System - "IMMOBILIZER SYSTEM ")

      [In the case of installing new ECM] 

    • Perform "Key teaching" procedure with diagnostic tool. (Refer to Body Electrical System - "IMMOBILIZER SYSTEM ")
About FixVault