FixVault
Home › Hyundai › 2023 › Elantra N Standard Trans › Repair and Diagnosis (Single Page) › Brakes › Traction Control › Electronic Stability Control (ESC) System › ESC (Electronic Stability Control) Module › Repair Procedures › Installation

Repair Procedures: Installation

  1. To install, reverse the removal procedure.
  2. After installation, bleed the brake system.

    (Refer to Brake System - "BRAKE BLEEDING PROCEDURES ")

  3. Conduct the Variant coding.
  4. Conduct the Auto Detected Sensor Calibration.
  5. Conduct the Longitudinal G Sensor Calibration.
About FixVault