FixVault
Home › Hyundai › 2023 › Kona N › Repair and Diagnosis › Suspension › Wheel Alignment › Tires/Wheels/Alignment › Wheel › Repair Procedures › Run Out Inspection

Run Out Inspection

  1. Jack up the vehicle.
  2. Measure the wheel Run-out by using a dial indicator as shown in the illustration below.
    Run-out Aluminum
    Radial mm (in.) Below 0.3 (0.012)
    Axial mm (in.) Below 0.3 (0.012)
    G16186745Courtesy of HYUNDAI MOTOR AMERICA
  3. If measured value exceeds the standard value, replace the wheel.
About FixVault