FixVault
Home › Hyundai › 2023 › Tucson Plug-In Hybrid SEL › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (PHEV) › Active Purge Pump Sensor › Repair Procedures › Removal › Active Purge Pump Sensor [Rear]

Active Purge Pump Sensor [Rear]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the front active purge pump sensor connector (A).
  3. Release the fixing hook and then remove the active purge pump sensor (B).
    G16172536Courtesy of HYUNDAI MOTOR AMERICA
About FixVault