FixVault
Home › Hyundai › 2024 › Elantra N Line › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.6L (Except HEV) › Accelerator Position Sensor (APS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the accelerator position sensor connector (A).
    G16687287Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the accelerator pedal module after loosening the nut (A).
    G16687288Courtesy of HYUNDAI MOTOR AMERICA
About FixVault