Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.

Measure the resistance of pressure sensor

Turn ignition switch OFF.
Disconnect the pressure sensor connector.
Measure resistance between sensor terminal and terminal.

Check the measured resistance.

(Refer to table)

TERMINAL AND RESISTANCE SPECIFICATIONS

Terminal	Resistance
PIN 2 - PIN 3	153.2 - 255.36 kΩ
PIN1 - PIN 3	50.3 - 75.6 kΩ
PIN1 - PIN 2	123.36 - 328.56 kΩ