FixVault
Home › Hyundai › 2024 › Santa Cruz XRT › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.5T › Engine Control Module (ECM) › Repair Procedures › Adjustment › [When Installing An ECM With Learning Experience]

[When Installing An ECM With Learning Experience]

  1. Perform "ECM Neutral Mode" procedure with diagnostic tool.

    (Refer to Body Electrical System - " NEUTRALIZING OF ECM  ") 

  2. After finishing "ECM Neutral Mode", perform "Key teaching" procedure with diagnostic tool.

    (Refer to Body Electrical System - " KEY TEACHING PROCEDURE  ") 



  1. Perform "ECM Neutral Mode" procedure with diagnostic tool.

    (Refer to Body Electrical System - "NEUTRALIZING OF ECM ")

  2. After finishing "ECM Neutral Mode", Use a key (or press the start button) and turn it to the IGN ON and OFF position. Then the ECM learns the smart key information automatically.

    (Refer to Body Electrical System - "SMART KEY ")

About FixVault