Schematic Diagrams: Installation

NOTE:

Install the component to the specified torque.
Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
Do not use any dropped variable force solenoid (VFS) valve.
Note below cautions when installing variable force solenoid (VFS) valve.

After replacing the O-ring (A) of variable force solenoid (VFS) valve, apply engine oil on new O-ring (A).

Courtesy of HYUNDAI MOTOR AMERICA

Push variable force solenoid (VFS) valve up to the timing chain cover, and temporarily tighten the bolt.
Tighten the variable force solenoid (VFS) valve to the specified torque.