FixVault
Home › Hyundai › 2025 › Kona N Line, 4WD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.6 › Heated Oxygen Sensor (HO2S) › Inspection

Heated Oxygen Sensor (HO2S): Inspection

  1. Turn the ignition switch OFF.
  2. Disconnect the Heated Oxygen Sensor (HO2S) connector.
  3. Measure resistance between the Heated Oxygen Sensor (HO2S) terminals 2 and 5. [HO2S - Front]

    Measure resistance between the Heated Oxygen Sensor (HO2S) terminals 3 and 4. [HO2S - Rear]

  4. Check that the resistance is within the specification.

    Specification:  Refer to "SERVICE INFORMATION "

About FixVault