FixVault
Home › Hyundai › 2025 › Kona N Line, 4WD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.6 › Oil Pressure & Oil Temperature Sensor (OPTS) › Inspection › Component Inspection

Component Inspection

  1. Check the engine oil temperature with the GDS.
  2. Disconnect the Oil Pressure & Temperature Sensor (OPTS) connector.
  3. Measure resistance between the Oil Pressure & Temperature Sensor (OPTS) terminals 1 and 4.
  4. Check that the resistance is within the specification.

    Specification:  Refer to "SERVICE INFORMATION "

About FixVault