FixVault

Fingerprint Recognition System: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install in the reverse order of removal.
    NOTE:
    • If either one of ccNC or fingerprint recognition module (FPM) is replaced, "AVNT-FPM Learning Mode" under ccNC additional features must be performed.

      (Refer to Connected Car Navigation Cockpit (ccNC) - "LEARNING METHOD ")

    • When replacing OTA controller, use the diagnostic device to update S/W. (If the S/W update is not complete, OTA update is not possible.)

      (Refer to Security & Vehicle Ignition System - "OVER THE AIR (OTA) ")