Rear Left Hand Passenger's Switch

1. Unplug switch connector. With switch in UP position, continuity should exist between terminals No. 1 and 3. continuity should not exist with switch released.
2. With switch in DOWN position, continuity should exist between terminals No. 1 and 2. Continuity should not exist with switch released. Replace switch if continuity is not as specified.

Fig 1: Identifying Driver's Power Window Switch Terminals (Q45)

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Identifying Passenger's Power Window Switch Terminals (Q45)

Courtesy of NISSAN MOTOR CO., U.S.A.