FixVault
Home › Infiniti › 1996 › G20 Base, Automatic, 1RL4F03A › Repair and Diagnosis › Engine Performance › System › Engine Controls - Basic Testing 2.0L › Ignition Checks › Optical Ignition System Checks › Ignition Coil Resistance

Ignition Coil Resistance

  1. Disconnect ignition coil harness connector. Using ohmmeter, check resistance between ignition coil terminals. Resistance should be about one ohm.
  2. Check resistance between ignition coil Black/Red wire terminal and coil tower. See Fig 1 . Resistance should be about 25,000 ohms. If ignition coil resistance is not as specified, replace distributor.
Fig 1: Checking Ignition Coil Secondary (G20)
G96C10779Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault