ASCD Main Switch

Disconnect harness connector and remove switch. See COMPONENT LOCATIONS table. Using a DVOM, check for continuity between indicated switch terminals with switch in appropriate position. See ASCD MAIN SWITCH TEST table. See Fig 1 .

ASCD MAIN SWITCH TEST

Switch Position

Continuity Between Terminals No.

⁽¹⁾ 1, 2, 3 & 4; ⁽²⁾ 5 & 6

"N"(Neutral)

⁽¹⁾ 2, 3 & 4; ⁽²⁾ 5 & 6

Off

⁽²⁾ 5 & 6

⁽¹⁾	Terminal No. 4 is for main switch indicator light.

⁽²⁾	Terminals No. 5 and 6 are for illumination circuits.

Fig 1: Identifying ASCD Main Switch Terminals

Courtesy of NISSAN MOTOR CO., U.S.A.