ASCD Main Switch
Disconnect ASCD main switch harness connector and remove switch. See COMPONENT LOCATIONS table. Check for continuity between indicated switch terminals with switch in appropriate position. See ASCD MAIN SWITCH TEST table. See Figure . If continuity is not as specified, replace ASCD main switch.
ASCD MAIN SWITCH TEST
| Switch Position | Continuity Between Terminals No. | ||||
|---|---|---|---|---|---|
| On | (1) 1, 2, 3 & 4; (2) 5 & 6 | ||||
| "N" (Neutral) | (1) 2, 3 & 4; (2) 5 & 6 | ||||
| Off | (2) 5 & 6 | ||||
|
|||||