Bleeding Brake System
WARNING: This page is about a different car, the 2000 Nissan Pathfinder, 2000 Infiniti QX4, and 1999 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
Turn ignition off. Disconnect actuator connectors. Bleed brake system in a conventional manner using the following sequence: master cylinder (if necessary), Load Sensing Valve (LSV) (on 4WD models), left rear wheel cylinder, right rear wheel cylinder, left front caliper, right front caliper and bleeder on ABS control unit.