Door Lock/Unlock Switch
NOTE:
Switch is part of power window switch assembly.
- Ensure ignition is off. Disconnect SECU 24-pin harness connector. Check continuity between ground and terminals No. 23 and 35. See DOOR LOCK/UNLOCK SWITCH CONTINUITY CHECK
table. If continuity is as specified, door lock/unlock switch is okay. If continuity is not as specified, go to next step.DOOR LOCK/UNLOCK SWITCH CONTINUITY CHECK
Terminal No. (1) Switch Position Continuity 23 Lock Yes Neutral/Unlock No 35 Unlock Yes Neutral/Lock No (1) See Figure for terminal location. - Disconnect power window switch harness connectors. Check continuity between specified terminals. See POWER WINDOW SWITCH CONTINUITY CHECK
table. If continuity is as specified, switch is okay. Inspect ground circuit and circuits between switch and SECU for open or short. Repair as needed. If continuity is not as specified, replace power window switch.POWER WINDOW SWITCH CONTINUITY CHECK
Terminal No. (1) Switch Position Continuity Driver's Power Window Switch 5 & 6 Lock Yes 5 & 19 Unlock Yes Passenger's Power Window Switch 7 & 8 Lock Yes 7 & 18 Unlock Yes (1) See Fig 1 for terminal location.