Component Inspection
Disconnect TP sensor harness connectors. Using ohmmeter, measure resistance across specified terminals. See TP SENSOR RESISTANCE table. Replace as needed.
TP SENSOR RESISTANCE
| Measure Between Terminals No. (1) | Accelerator Position | Approximate Ohms | |||
|---|---|---|---|---|---|
| TP Sensor | |||||
| 2 & 3 | Released | 600 | |||
| 2 & 3 | Partially Open | 600-4000 | |||
| 2 & 3 | WOT | 4000 | |||
| Closed TP Switch | |||||
| 5 & 6 | Released | Zero | |||
| 5 & 6 | Depressed | Infinite | |||
| Wide Open TP Switch | |||||
| 4 & 5 | Released | Infinite | |||
| 4 & 5 | Depressed | Zero | |||
|
|||||