Memory Automatic Set
Two drive positions can be retained in the memory. Press memory switch to set driver's seat to preset position.
PROCEDURE FOR STORING MEMORY
NOTE:
When memory switch for which driver's seat positions are already retained in memory is pressed, new seat positions will be retained in memory in place of the previously set positions.
Drive position is erased from the memory when battery cable is disconnected more than 30 seconds. After connecting battery cable, perform initialization procedures.
Drive position is erased from the memory when battery cable is disconnected more than 30 seconds. After connecting battery cable, perform initialization procedures.
SELECTING THE MEMORIZED POSITION
NOTE:
- Do not keep cancel switch pressed as it will not operate.
- Automatic exiting setting will be performed.
- The driver's seat position (see the following Table) operates in the order of priority.
MEMORY AUTOMATIC SET
| The order of priority | Operated portion |
|---|---|
| 1 | Seat sliding |
| 2 | Seat reclining |
| 3 | Seat front lifting |
| 4 | Seat rear lifting |