FixVault
Home › Infiniti › 2001 › QX4 4WD › Repair and Diagnosis (Single Page) › General Information › Towing › General Information › Consult-II Checking System › Function and System Application

Function and System Application

FUNCTION AND SYSTEM APPLICATION

Diagnostic test mode Function ENGINE ALLMODE 4WD A/T ABS AIR BAG IVCS (1)1 IVIS (NATS) (2)2 SMART ENTRANCE (3) 3 (Type 1) SMART ENTRANCE (3) 3 (Type 2)
Work support This mode enables a technician to adjust some devices faster and more accurate by following the indications on CONSULT-II. * * - - - - - - *
Self-diagnostic results Self-diagnostic results can be read and erased quickly. * * * * * * * - -
Trouble diagnostic record Current self-diagnostic results and all trouble diagnostic records previously stored can be read. - - - - * - - - -
ECU discriminated No. Classification number of a replacement ECU can be read to prevent an incorrect ECU from being installed. - - - - * - - - -
Data monitor Input/Output data in the ECU (ECM) can be read. * * * * - * - - *
Data monitor (Spec.) The specified values will be displayed when an OK/NG judgement is difficult for the DATA MONITOR items by Bar Chart and Line Graph. * - - - - - - - -
DTC work support This mode enables a technician to set operating conditions to confirm self-diagnosis status/results. - - * - - - - - -
Active test Diagnostic Test Mode in which CONSULT-II drives some actuators apart from the ECMs and also shifts some parameters in a specified range. * - - * - - - - *
ECU (ECM) part number ECU (ECM) part number can be read. * * * * - * - - -
Control unit initialization All registered ignition key IDs in NATS components can be initialized and new IDs can be registered. - - - - - - * - -
SRT & DTC confirmation The results of SRT (System Readiness Test) and the self-diagnosis status/results can be confirmed. * - - - - - - - -
Function check "Remote door unlock function" of IVCS system can be checked in this mode. - - - - - * - - -
Registered data Display the VIN, etc. data registered in the IVCS unit. - - - - - * - - -
Configuration
  • The IVCS system can be set up in the demonstration mode to confirm system operation.
  • Various data related to both the Communicator Response Center contract and cellular provider can be written/rewritten in this mode.
 - - - - - * - - -
REMOCONT ID SET UP A maximum of four IDs (identifications) can be registered in the memory using the remote controller. These IDs can be also be confirmed and erased as required. - - - - - - - * -
*: Applicable
(1) INFINITI Communicator (IVCS)
(2) IVIS (NATS) [INFINITI Vehicle Immobilizer System (Nissan Anti-Theft System)]
(3) Either type 1 or type 2 will be equipped.
About FixVault