Symptom Chart

NOTE: Always check remote controller battery before replacing remote controller.
The panic alarm operation of multi-remote control system does not activate with the ignition key inserted in the ignition key cylinder.

MULTI-REMOTE CONTROL SYSTEM SYMPTOM CHART

Symptom	Diagnoses/service procedure
All function of multi-remote control system do not operate.	1. Remote controller battery check
	2. Power supply and ground circuit for control unit check
	3. Replace remote controller. Refer to ID CODE ENTRY PROCEDURE .
The new ID of remote controller cannot be entered.	1. Remote controller battery check
	2. Key switch (insert) check
	3. Door switch check
	4. Door lock/unlock switch LH check
	5. Power supply and ground circuit for control unit check
	6. Replace promote controller. Refer to ID CODE ENTRY PROCEDURE .
Door lock or unlock does not function. (If the power door lock system does not operate manually, check power door lock system. Refer to POWER DOOR LOCK .)	1. Replace remote controller. Refer to ID CODE ENTRY PROCEDURE .
Hazard and horn reminder does not activate properly when pressing lock or unlock button of remote controller.	1. Hazard reminder check
	2. Horn reminder check*: Horn chirp can be activated or deactivated. First check the horn chirp setting. Refer to "System Description", MULTI-REMOTE CONTROL SYSTEM .
	3. Door switch check
	4. Replace remote controller. Refer to ID CODE ENTRY PROCEDURE .
Interior lamp operation does not activate properly.	1. Interior room lamp operation check
	2. Door switch check
	3. Front LH door unlock sensor check
Panic alarm (horn and headlamp) does not activate when panic alarm button is continuously pressed.	1. Vehicle security operation check. Refer to "PRELIMINARY CHECK " in "VEHICLE SECURITY SYSTEM".
	2. Key switch (insert) check
	3. Replace remote controller. Refer to ID CODE ENTRY PROCEDURE .