Active Test Procedure

When conducting Active test, vehicle must be stationary.
When ABS warning lamp or SLIP indicator lamp stays on, never conduct Active test.

Turn ignition switch OFF.
Connect CONSULT-II to Data Link Connector.
Start engine.
Touch "START" on CONSULT-II screen.

Fig 1: CONSULT-II Display - Touch "START"
Courtesy of NISSAN MOTOR CO., U.S.A.
Touch "ABS".

Fig 2: CONSULT-II Display - Touch "ABS"
Courtesy of NISSAN MOTOR CO., U.S.A.
Touch "ACTIVE TEST".

Fig 3: CONSULT-II Display - Touch "ACTIVE TEST"
Courtesy of NISSAN MOTOR CO., U.S.A.
Select active test item by touching screen.

Fig 4: "SELECT TEST ITEM" Screen Display
Courtesy of NISSAN MOTOR CO., U.S.A.
Touch "START".
Carry out the active test by touching screen key.

Fig 5: CONSULT-II Display - Touch "START"
Courtesy of NISSAN MOTOR CO., U.S.A.