Diagnostic Procedure
- SELF-DIAGNOSIS RESULT CHECK 1
Check the self-diagnosis results.
Are any items other than above indicated in self-diagnosis results?
- Yes : Repair or replace harness or connector.
- No : GO TO 2.
- SELF-DIAGNOSIS RESULT CHECK 2
- Perform the ECM self-diagnosis, and repair or replace harness or connector, then perform the ECM self-diagnosis again.
- Perform the TCS/ABS control unit self-diagnosis again.
Is inspection result OK?
- OK : INSPECTION END
- NG : Repair or replace harness or connector. Perform the self-diagnosis again.