FixVault
Home › Infiniti › 2003 › FX35 AWD › Repair and Diagnosis › Engine Performance › System › Engine Controls - Self-Diagnostics › Diagnostic Tests › DTC P0550: Power Steering Pressure Sensor Circuit › DTC Confirmation Procedure

DTC Confirmation Procedure

NOTE: If DTC confirmation procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

Using CONSULT-II Or GST

  1. Turn ignition switch to ON position.
  2. Select DATA MONITOR mode.
  3. Start engine and let idle for at least 5 seconds.
  4. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE . If 1st trip DTC is not detected, system is okay at this time.
About FixVault