Light Warning Chime

With the key removed from the ignition switch or when the ignition knob is in LOCK (push switch OFF) [with Intelligent Key], the driver's door is opened, and the lighting switch is in ON position, the warning chime will sound. [Except when headlamp battery saver control operates (for 5 minutes after ignition switch is turned to OFF or ACC position) and headlamps do not illuminate.]

Signal is supplied

• From combination switch (lighting switch) terminals 1, 2, 3, 4, 5, 6, 7, 8, 9 and 10
• To BCM terminals 2, 3, 4, 5, 6, 32, 33, 34, 35 and 36.
  NOTE: BCM detected lighting switch in 1st or 2nd position, refer to "COMBINATION SWITCH READING FUNCTION ".

Ground is supplied

• To BCM terminal 62
• Through front door switch (driver side) terminal 1.

Front door switch (driver side) is case grounded.

BCM detects headlamps are illuminated, and sends light warning signal to unified meter and A/C amp. with CAN communication line. Unified meter and A/C amp. sends light warning signal to combination meter with communication line between unified meter and A/C amp. and combination meter.

When combination meter receives light warning signal, it sounds warning chime.