Cylinder Block Specifications
WARNING: This page is about a different car, the 2004 Infiniti FX35 and 2003 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER BLOCK
| Application |
In. (mm) |
| Cylinder Bore |
| Standard Diameter |
| Grade No. 1 |
3.7598-3.7602 (95.500-95.510) |
| Grade No. 2 |
3.7602-3.7606 (95.510-95.520) |
| Grade No. 3 |
3.7606-3.7610 (95.520-95.530) |
| Main Journal Inner Diameter Grade (Without Bearing) |
| Journal Diameter |
| Grade No. A |
2.5194-2.5194 (63.993-63.994) |
| Grade No. B |
2.5194-2.5195 (63.994-63.995) |
| Grade No. C |
2.5195-2.5195 (63.995-63.996) |
| Grade No. D |
2.5195-2.5196 (63.996-63.997) |
| Grade No. E |
2.5196-2.5196 (63.997-63.998) |
| Grade No. F |
2.5196-2.5196 (63.998-63.999) |
| Grade No. G |
2.5196-2.5197 (63.999-64.000) |
| Grade No. H |
2.5197-2.5197 (64.000-64.001) |
| Grade No. J |
2.5197-2.5198 (64.001-64.002) |
| Grade No. K |
2.5198-2.5198 (64.002-64.003) |
| Grade No. L |
2.5198-2.5198 (64.003-64.004) |
| Grade No. M |
2.5198-2.5199 (64.004-64.005) |
| Grade No. N |
2.5199-2.5199 (64.005-64.006) |
| Grade No. P |
2.5199-2.5200 (64.006-64.007) |
| Grade No. R |
2.5200-2.5200 (64.007-64.008) |
| Grade No. S |
2.5200-2.5200 (64.008-64.009) |
| Grade No. T |
2.5200-2.5201 (64.009-64.010) |
| Grade No. U |
2.5201-2.5201 (64.010-64.011) |
| Grade No. V |
2.5201-2.5202 (64.011-64.012) |
| Grade No. W |
2.5202-2.5202 (64.012-64.013) |
| Grade No. X |
2.5202-2.5202 (64.013-64.014) |
| Grade No. Y |
2.5202-2.5203 (64.014-64.015) |
| Grade No. 4 |
2.5203-2.5203 (64.015-64.016) |
| Grade No. 7 |
2.5203-2.5203 (64.016-64.017) |
| Maximum Taper |
.0006 (.015) |
| Maximum Out-Of-Round |
.0006 (.015) |
| Maximum Deck Warpage |
.004 (.10) |