Sliding Switch and Reclining Switch Ground Circuit Inspection

1. Disconnect power seat switch.
2. Check continuity between power seat switch as follows.
   Fig 1: Checking Power Seat Switch

   Courtesy of NISSAN MOTOR CO., U.S.A.
   TERMINAL CONTINUITY
   
   

   Connector	Terminals (Wire color)		Condition	Continuity
   	(+)	(-)
   B156	26 (L/P)	61B (B/Y)	Front lifting switch ON (UP operation)	Yes
   			Front lifting switch OFF	No
   	39 (L/G)		Front lifting switch ON (DOWN operation)	Yes
   			Front lifting switch OFF	No

OK or NG

1. OK: GO TO 2.
2. NG: Replace power seat switch.

Check continuity between power seat switch connector B156 terminal 61B (B/W) and ground.

Fig 2: Checking Power Seat Switch Ground Circuit

Courtesy of NISSAN MOTOR CO., U.S.A.

61B (B/Y) - Ground: Continuity should exist. 

OK or NG

1. OK: Check the condition of the harness and connector.
2. NG: Repair or replace harness between power seat switch and ground.