FixVault
Home › Infiniti › 2003 › G35 2D Coupe, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls System - Introduction - Coupe › Basic Service Procedure › Fuel Pressure Check › Fuel Pressure Release › With CONSULT-II

With CONSULT-II

  1. Turn ignition switch ON.
  2. Perform "FUEL PRESSURE RELEASE" in "WORK SUPPORT MODE " with CONSULT-II.
    Fig 1: Displaying "FUEL PRESSURE RELEASE" In "WORK SUPPORT" Mode With CONSULT-II
    G03582881Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Start engine.
  4. After engine stalls, crank it two or three times to release all fuel pressure.
  5. Turn ignition switch OFF.
About FixVault