FixVault
Home › Infiniti › 2003 › G35 2D Coupe, Standard › Repair and Diagnosis › Engine Performance › System › Engine Controls System - Component Testing - Coupe › Ignition Signal › Component Inspection › Condenser

Component Inspection: Condenser

  1. Turn ignition switch OFF.
  2. Disconnect condenser harness connector.
  3. Check resistance between condenser terminals 1 and 2.
    RESISTANCE CONDITION CHART

    Resistance Above 1 MΩ at 25°C (77°F)
    Fig 1: Checking Resistance Between Condenser Terminals 1 And 2
    G03583529Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault