Method B

WARNING: This page is about a different variant/trim than selected.

Remove No. 1 ignition coil.

Fig 1: Locating No. 1 Ignition Coil
Courtesy of NISSAN MOTOR CO., U.S.A.
Connect No. 1 ignition coil and No. 1 spark plug with suitable high-tension wire as shown in illustration, and attach timing light clamp to this wire.

Fig 2: Connecting No. 1 Ignition Coil And No. 1 Spark Plug With Suitable High-Tension Wire
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: Suitable High-Tension Wire
Courtesy of NISSAN MOTOR CO., U.S.A.
Check ignition timing.

Fig 4: Identifying Ignition Timing Marks
Courtesy of NISSAN MOTOR CO., U.S.A.