FixVault
Home › Infiniti › 2003 › I35 › Repair and Diagnosis › Engine Performance › System › Engine Controls - Self-Diagnostics › Diagnostic Tests › DTC P0605: Engine Control Module › Diagnostic Procedure

Diagnostic Procedure

  1. If using CONSULT-II, go to next step. If using generic scan tool, go to step  3 .
  2. Turn ignition on. Select SELF-DIAG RESULTS mode with CONSULT-II. Press ERASE. Perform DTC CONFIRMATION TEST "A"  again. If 1st trip DTC is detected, replace ECM. If 1st trip DTC is not detected, test is complete.
  3. Turn ignition on. Select MODE 4 with scan tool. Press ERASE. Perform DTC CONFIRMATION TEST "A"  again. If 1st trip DTC is detected, replace ECM. If 1st trip DTC is not detected, test is complete.
About FixVault