FixVault
Home › Infiniti › 2003 › I35 › Repair and Diagnosis › External Pages › Different car › Section 237 (Engine Control System) › DTC P0335: CKP Sensor (Pos) › DTC Confirmation Procedure › Testing Condition:

Testing Condition:

WARNING: This page is about a different car, the 2004 Infiniti I35. However, it is still accessible from the selected car via links, so may be relevant.

Before performing the following procedure, confirm that battery voltage is more than 10.5V with ignition switch ON. 

With CONSULT-II 

  1. Turn ignition switch ON and select DATA MONITOR mode with CONSULT-II. See Figure
  2. Crank engine for at least 2 seconds and run it for at least 5 seconds at idle speed.
  3. If 1st trip DTC is detected, go to Diagnostic Procedure, DIAGNOSTIC PROCEDURE  .

    If 1st trip DTC is not detected, go to next step.

  4. Maintaining engine speed at more than 1,000 rpm for at least 5 seconds.
  5. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE 

With GST 

Follow the procedure With CONSULT-II.

About FixVault