Fuel Tank: Installation
WARNING: This page is about a different car, the 2004 Infiniti I35. However, it is still accessible from the selected car via links, so may be relevant.
To install, reverse the removal procedure. Connect the quick connector as follows:
- Align mating marks on tubes and connectors for correct installation.
- Be sure that the connecting portion of the tube and the quick connectors is clean and smooth.
- Align push in tabs with retainer openings.
- Insert tube into the center of the connector until you hear a click.
After connecting quick connector, make sure the connection is firmly made using the following method.
- Pull on the fuel tube and connector to make sure they are firmly connected.
Make sure that there are no leakage at fuel line connections as follows.
- Apply fuel pressure to fuel lines with ignition switch turned ON (with engine stopped). Then check that there are no leaks.
- Start the engine, increase engine speed and verify that there are no leaks again.