Repair For Component Parts: Inspection: Notes
WARNING: This page is about a different car, the 2004 Infiniti I35. However, it is still accessible from the selected car via links, so may be relevant.
Low and Reverse Brake Snap Ring, Spring Retainer and Return Springs
- Check for deformation, fatigue or damage.
If necessary, replace.
- When replacing spring retainer and return springs, replace them as a set.
Low and Reverse Brake Drive Plate
- Check facing for burns, cracks or damage.
- Measure thickness of facing.
- Thickness of drive plate: Standard value 1.8 mm (0.071 in)
- Wear limit 1.6 mm (0.063 in)
- If not within wear limit, replace.