Check Electronic Key

With CONSULT-II 

Check Electronic key "LOCK / UNLOCK BUTTON", "TRUNK BTN-CON" and "PANIC BTN" in "DATA MONITOR" mode with CONSULT-II.

Without CONSULT-II 

Check electronic key in "SWITCH MONITOR" mode. refer to "SWITCH MONITOR ".

OK or NG 

1. OK >> Electronic key is OK.
2. NG >> GO TO 2.

With CONSULT-II 

Check electronic key "ID Code" in "WORK SUPPORT" mode with CONSULT-II.

Refer to "PROCEDURE 2 (WITH CONSULT-II) ".

Without CONSULT-II 

Check electronic key "ID Code" in "REMOTE CONTROLLER ID SET UP" mode.

Refer to "PROCEDURE 1 (WITHOUT CONSULT-II) ".

OK or NG? 

1. OK >> Electronic key was not registered.
2. NG >>
   • Check remote keyless entry receiver.

     Refer to "CHECK REMOTE KEYLESS ENTRY RECEIVER ".

   • Check electronic key battery.

     Refer to "CHECK ELECTRONIC KEY BATTERY ".