With CONSULT-II
WARNING: This page is about a different car, the 2004 Infiniti Q45. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch ON.
- Select "DATA MONITOR" mode with CONSULT-II.
- Crank engine for at least 2 seconds and run it for at least 5 seconds at idle speed.
- If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE
.
If 1st trip DTC is not detected, go to next step.
- Maintain engine speed at more than 800 RPM for at least 5 seconds.
- If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE