FixVault
Home › Infiniti › 2003 › Q45 › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle › Shift Control System › Control Device Removal and Installation › Removal

Control Device Removal and Installation: Removal

  1. Disconnect lower lever of control device and control rod.
  2. Remove console finisher.
    • Refer to "INSTRUMENT PANEL ASSEMBLY ".
  3. Remove console box assembly.
    • Refer to "INSTRUMENT PANEL ASSEMBLY ".
  4. Remove rear ventilator duct.
    • Refer to "REAR VENTILATOR DUCTS ".
  5. Disconnect control device harness connector.
  6. Remove control device assembly.
About FixVault