FixVault
Home › Infiniti › 2003 › QX4 4WD › Repair and Diagnosis › Engine Performance › System › Engine Controls - Self-Diagnostics › Diagnostic Tests › DTC P0181: Fuel Tank Temperature Sensor - Range/Performance Problem › DTC Confirmation Test

DTC Confirmation Test

NOTE: If DTC confirmation procedure had been previously run, turn ignition off and wait at least 10 seconds before continuing.
  1. Turn ignition on. Select DATA MONITOR mode with CONSULT-II. Wait at least 10 seconds. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE . If 1st trip DTC is not detected, go to next step.
  2. ON scan tool, observe COOLAN TEMP/S value. If COOLAN TEMP/S is more than 140°F (60°C), allow engine to cool until COOLAN TEMP/S is less than 140°F (60°C).
  3. Wait at least 10 seconds. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE . If 1st trip DTC is not detected, system is okay at this time.
About FixVault