Fail-Safe System Check

Turn ignition switch to ON position.
Turn ASCD main switch to ON and check if the SET indicator blinks.
If the indicator lamp blinks, check the following.
- ASCD steering switch. Refer to ASCD STEERING SWITCH CHECK .
  
  Fig 1: SET Indicator Display
  Courtesy of NISSAN MOTOR CO., U.S.A.
Drive the vehicle at more than 40 km/h (25 MPH) and push SET/COAST switch.
If the indicator lamp blinks, check the following.
- Vehicle speed signal. Refer to VEHICLE SPEED SIGNAL CHECK .
- ASCD pump circuit. Refer to ASCD PUMP CIRCUIT CHECK .
- Replace control unit.
  
  Fig 2: Pushing SET/COAST Switch On After Driving More Than 40 Km/H (25 MPH)
  Courtesy of NISSAN MOTOR CO., U.S.A.
Depress brake pedal slowly (brake pedal should be depressed more than 5 seconds).
If the indicator lamp blinks, check the following.
- ASCD brake/stop lamp switch. Refer to ASCD BRAKE/STOP LAMP SWITCH CHECK .
  
  Fig 3: Depressing Brake Pedal
  Courtesy of NISSAN MOTOR CO., U.S.A.
END. (System is OK.)