System Description: Notes

The warning chime is controlled by the smart entrance control unit.

The warning chime is located in the smart entrance control unit. Power is supplied at all times

• through 7.5A fuse [No. 24, located in fuse block (J/B)]
• to smart entrance control unit terminal 49 and
• to key switch terminal 2,
• through 10A fuse (No. 61, located in the fuse and fusible link box)
• to tail lamp relay terminals 1 and 3.

When the ignition switch in the ON or START position, power is supplied

• through 7.5A fuse [No. 11, located in the fuse block (J/B)]
• to smart entrance control unit terminal 27.

Ground is supplied

• to smart entrance control unit terminals 43 and 64
• through body grounds M77 and M111.

When a signal, or combination of signals, is received by the smart entrance control unit, the warning chime will sound.