FixVault
Home › Infiniti › 2004 › FX45 › Repair and Diagnosis › Electrical › Gauges › Driver Information System › Combination Meters › Disassembly and Assembly of Combination Meter › Disassembly

Disassembly and Assembly of Combination Meter: Disassembly

  1. Remove screws (3) and remove rear cover.
  2. Disconnect odo/trip meter and illumination control switch connector.
    Fig 1: Disconnecting Odo/Trip Meter And Illumination Control Switch Connector
    G02359445Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Remove screws (2) and remove switch and meter housing.
    Fig 2: Removing Switch And Meter Housing
    G02359446Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Remove screws (2) and remove reinforcing metal.
  5. Disengage tabs (8) to separate front cover.
  6. Remove screws (2) and remove prate.
    Fig 3: Removing Reinforcing Metal
    G02359447Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault