FixVault

Monitored Item

MONITORED ITEM CHART

x: Applicable
Monitored Item [unit] ALL SIGNALS SELECTION FROM MENU Description
MAIN SW [ON/OFF] X X Displays [ON/OFF] status as judged from LDW switch signal.
SW ON LAMP [ON/OFF] X X Displays [ON/OFF] status of LDW system ON indicator signal output.
INDICATE LAMP [ON/OFF] X X Displays [ON/OFF] status of LDW indicator signal output.
BUZZER OUTPUT [ON/OFF] X X Displays [ON/OFF] status of LDW chime operation signal output.
LDW INACCURAT [ON/OFF] X X Displays LDW camera unit status.
VHCL SPD SE [km/h] or [mph] X X Displays vehicle speed calculated by LDW camera unit through CAN communication [ABS actuator and electric unit (control unit) transmits wheel sensor signal through CAN communication).
VHCL SPD AT [km/h] or [mph] X X Displays vehicle speed calculated from A/T vehicle speed sensor by LDW camera unit through CAN communication (TCM transmits A/T vehicle speed sensor signal through CAN communication).
TURN SIGNAL [OFF/LH/RH] X X Displays "Turn signal" status, determined from BCM through CAN communication.
LANE DETCT LH [ON/OFF] X X Displays left lane marker is detected.
LANE DETCT RH [ON/OFF] X X Displays right lane marker is detected.
CROSS LANE LH [ON/OFF] X X Displays vehicle is crossing left lane.
CROSS LANE RH [ON/OFF] X X Displays vehicle is crossing right lane.
WARN LANE LH [ON/OFF] X X Displays warning for left lane.
WARN LANE RH [ON/OFF] X X Displays warning for right lane.
VALID POS LH [VLD/INVLD] X X Displays lateral position for left lane marker is valid.
VALID POS RH [VLD/INVLD] X X Displays lateral position for right lane marker is valid.
AIMING DONE [OK/NG] X X Displays camera aiming done.
AIMING RESULT [OK/NOK] X X Displays camera aiming result.
FCTRY AIM YAW [deg] X X Displays camera unit installation condition.
FCTRY AIM ROLL [deg] X X Displays camera unit installation condition.
FCTRY AIM PIT [deg] X X Displays camera unit installation condition.
XOFFSET [pixel] X X Displays camera unit installation condition.