ICC Brake Switch

WARNING: This page is about a different car, the 2004 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch OFF.
Disconnect ICC brake switch harness connector.
Check continuity between ICC brake switch terminals 1 and 2 under the following conditions.

Fig 1: Testing ICC Brake Switch (W/DVOM)
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Identifying ICC Brake Switch Specifications
Courtesy of NISSAN MOTOR CO., U.S.A.

If NG, adjust ICC brake switch installation, Refer to brake pedal under ON-VEHICLE SERVICE , and perform step 3 again.