DTC Confirmation Procedure
WARNING: This page is about a different car, the 2004 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If DTC confirmation procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.
With CONSULT-II
- Turn ignition switch ON.
- Fully depress the brake pedal for at least 5 seconds.
- Erase the DTC with CONSULT-II.
- Select DATA MONITOR mode with CONSULT-II. See Figure.
- If 1st trip DTC is detected, Go to DIAGNOSTIC PROCEDURE
With GST
Follow the procedure with CONSULT-II above.